Types of furniture liners

At present, the furniture edge sealing machine on the market is roughly divided into automatic edge sealing machine, semi-automatic edge sealing machine, and manual edge sealing machine. Different fenders are also different in function and use.
I. Automatic furniture sealing machine:
This machine is suitable for straight sealing edges such as medium-density fibreboard, Joinery board, solid wood board, planer board, polymer door board, plywood, etc.. It can have sealing edge strips to bond and tighten, head, and corners at one time., rough repair, finishing, scraping, polishing and other functions, The sealing edge is delicate, smooth, and feels good, and the sealing line is straight and smooth. The equipment is stable, reliable and durable, especially suitable for large and medium-sized furniture, cabinets and other board furniture manufacturers to use, high-temperature gum sealing edge glue low-temperature glue.

Functional introduction of each department:
1. Premilling: double milling cutter is used to redecorate the corrugated marks, burrs or non-vertical phenomena caused by the cutting saw after the cutting saw is opened, so as to achieve better sealing effect. Make the sealing edge bar and plate closer to the joint, the integrity and beauty of the better.
2. Coating edge: through a special structure, the edge plate and the edge material can be evenly coated on both sides to ensure that the adhesion force is more solid.
3. The same head: Through the precise linear guide rail movement, adopts the automatic tracking of the mold and the rapid cutting structure of the high-frequency high-speed motor to ensure that the cut section is smooth and smooth.
4. Precision: All adopt automatic tracking and high frequency high-speed motor structure to ensure the smooth and smooth shape of the upper and lower parts of the trim plate. Used for repairing the excess edge material above and below the plate seal bar. The finishing knife is an R-shaped knife. It is mainly used for PVC seals for board furniture, and it is better to cover the edges with a thickness of 0.8 mm or more.
5. Scrubbing: Used to remove ripples caused by the cutting process of the trim edge, making the upper and lower parts of the plate more smooth and tidy.
6. Polishing: Clean up the finished plate with a cotton polishing wheel, and smooth the end of the seal through polishing.
7. Slot opening: For the closet side plate, bottom plate, etc.. Direct slot opening, reduce the cutting board saw process is more convenient and faster; It can also be used to slot the aluminum edge of the door plate.
II. Semi-automatic furniture sealing machine:
This machine is suitable for linear sealing of medium density fiberboard, fine wood board and planer board, and can complete the automatic production line of conveying sealing board, belt, upper and lower milling edge and polishing work at one time. The price is slightly lower, especially suitable for the manufacturers of plate furniture.

III. Manual furniture sealing machine:

The manual edge sealing machine is also known as the straight line sealing machine. From the current market demand, the manual edge sealing machine is more suitable for the use of small and medium-sized furniture factories, and the price is low, the operation is convenient, and it is easy to maintain. The products currently on the market are Italian, Japanese, Taiwanese and Chinese machines, which are divided into two categories according to their manufacturing principles: the upper and lower plastic cans, the former from the top down, the rubber cans from the top up, and the latter from the bottom up. The canister is down. Its characteristics are:
1, leakage glue. Due to the transmission of the plastic tank, the damage of the sealing ring will cause leakage of glue, which will affect the normal operation of the machine. There is no leakage problem on the plastic tank.
2, Sol is not aging. Under the glue can has the residual glue temperature aging effect on the quality of adhesion, the upper glue tank Sol from top to bottom seepage, no precipitation and residue.
3, easy to clean. The regular cleaning of the machine, on the plastic cans more convenient than under the plastic cans, can even not stop cleaning, does not affect production.