What about EVA furniture sealed-edge hot melt glue drawing?

How does EVA furniture seal edge hot melt glue pull wire, in the plate furniture seal process, if there is a situation of pull wire, roughly can look for reasons from the following aspects:
1. The situation is lighter:
A. Check whether the temperature of use is too high and the adhesive is too thin and, if so, may be appropriately reduced;
B. Check whether the amount of coating is too large, which can appropriately reduce the amount of coating;
C. Whether the hot melt adhesive selected matches the device;
D. Slow down production.
2. Under the premise of normal use, if the cable is very serious, it can be roughly judged as a problem of the glue itself.